四步确定防水等级、规格、材料与定制参数
Four steps to choose rating, size, material, and custom specs
选型核心看四件事:防水等级(IPX6-IPX8)、规格(#5/#8/#10)、材料(TPU/PEVA/硅胶/尼龙)和定制参数(长度/幅宽/颜色/拉头)。先确定应用场景,再按密封要求从高到低逐项匹配,即可快速锁定型号。
Selection comes down to four things: waterproof rating (IPX6-IPX8), size (#5/#8/#10), material (TPU/PEVA/silicone/nylon), and customization (length/width/color/slider). Identify your application first, then match sealing needs from high to low to narrow down the model.
| 等级 | 防护能力 | 典型应用 | YILON 对应产品 |
|---|---|---|---|
| IPX6 | 防强力喷水 | 雨具、防水袋、普通防水服 | PEVA / TPU 防水拉链 |
| IPX7 | 短时浸水(1m、30分钟) | 涉水装备、浮潜服、水上运动 | #5/#8 TPU 水密拉链 |
| IPX8 | 持续浸水(>1m,按约定) | 干式潜水服、深海作业服、军工/医疗保压 | #8/#10 TPU 气密拉链 |
| Rating | Protection | Typical uses | YILON products |
|---|---|---|---|
| IPX6 | Powerful water jets | Rainwear, dry bags, standard waterproof wear | PEVA / TPU waterproof zippers |
| IPX7 | Temporary immersion (1m, 30 min) | Wading gear, snorkeling, water sports | #5/#8 TPU watertight zippers |
| IPX8 | Continuous immersion (>1m, by agreement) | Drysuits, deep-sea workwear, military/medical pressure sealing | #8/#10 TPU airtight zippers |
| 规格 | 齿链宽参考 | 适用 |
|---|---|---|
| #5 | 约 5mm | 轻量化服装、防水袋、一般户外装备 |
| #8 | 约 8mm | 防护服、潜水服、充气装备 |
| #10 | 约 10mm | 重型工业、军工、快速卷帘门、高压保压设备 |
| Size | Approx. chain width | Applications |
|---|---|---|
| #5 | ~5mm | Lightweight garments, dry bags, general outdoor gear |
| #8 | ~8mm | Protective suits, drysuits, inflatable products |
| #10 | ~10mm | Heavy industry, military, rapid roller doors, high-pressure sealing |
应用场景、长度范围、开口长度、规格/幅宽、颜色、拉头样式、端部结构、材料、防水等级、耐油要求、测试条件、数量。
Application, length range, opening length, size/tape width, color, slider style, end structure, material, waterproof rating, oil-resistance requirement, test conditions, and quantity.
YILON:支持 #5/#8/#10,链宽 10-70mm,长度 5cm-100m,任意颜色定制;提供 IPX6-IPX8 全等级测试报告,可承受 60kPa 密封压力,经 3000+ 次开合循环测试;支持打样 → 验证 → 量产全流程。
YILON: We support #5/#8/#10, chain width 10-70mm, length 5cm-100m, and full color customization; provide IPX6-IPX8 test reports, 60kPa sealing strength, 3000+ open/close cycles; full sample-to-production support.